Chin projection with hyaluronic acid: how to improve the facial profile without surgery
Dr Eva Garrigós · 5 August 2026

The shape of the chin influences the overall appearance of the face far more than we tend to think. A slightly receding chin can make the nose look more prominent, the neck look less defined or create the impression of a double chin even in slim people.
In these cases, chin projection with hyaluronic acid makes it possible to precisely adjust the volume, length and definition of the chin without surgery. It is not simply a matter of “adding filler”, but of analysing how the nose, lips, chin, jaw and neck relate to one another to achieve a more balanced whole.
At our clinic we carry out a complete facial assessment before proposing the treatment. Sometimes a few millimetres of projection are enough; at other times it is advisable to also work on the jawline or consider complementary procedures. The key is not to treat the chin in isolation or try to reproduce a standard shape in every patient.
You can find more information about our chin projection with hyaluronic acid treatment.
What chin projection is and what changes it can achieve
Projecting the chin means bringing it slightly further forward to improve the relationship between the chin and the rest of the facial profile. The aim need not be to create a large or very pronounced chin. In fact, in most cases we look for a subtle change that makes the face appear more proportionate.
The treatment can help to:
- Visually correct a receding chin.
- Improve the continuity between the chin and the jaw.
- Define the boundary between the chin and the neck.
- Disguise certain asymmetries.
- Slightly lengthen the lower third of the face.
- Soften the groove below the lower lip.
- Achieve a more harmonious profile without surgery.
The clinical studies available on fillers specifically for the chin have observed significant improvements in patients with mild or moderate retrusion, with results that can still be noticeable after twelve months in a substantial proportion of patients.
How hyaluronic acid acts on shape and volume
The hyaluronic acid used in aesthetic medicine is a resorbable gel that makes it possible to create support and volume in specific areas. To work on the chin, products with suitable structural capacity are usually selected, as we are not looking for the same effect as in a superficial hydration treatment or a lip augmentation.
Depending on the plane and the point where it is placed, the product can:
- Increase forward projection.
- Support the central area of the chin.
- Correct small irregularities in level.
- Improve the transition towards the jawline.
- Gently modify the apparent width or length.
The placement of the product is as important as the amount used. A relatively small volume, placed at the right point, can create a more elegant change than an excessive or poorly distributed injection.
The difference between projecting, lengthening, widening and defining the chin
Although these terms are often used as if they meant the same thing, they describe different goals.
Projecting means visually bringing the chin forward. This is what a person with a receding chin usually needs.
Lengthening involves increasing the vertical dimension of the chin. It can be useful when the lower third of the face looks short, although it must be done cautiously so as not to create an overly long face.
Widening changes the frontal view. It can give a more solid or masculine appearance, but it is not always advisable in narrow or delicate faces.
Defining means improving the outline and shape without necessarily adding much projection. For example, we can soften an irregularity, mark the central point or improve the transition to the jaw.
Several of these goals can be combined in the same session, but always in proportion.
Receding chin: how to tell whether it affects facial harmony
Having a receding chin does not necessarily mean having a medical problem. In many cases it is simply an anatomical feature. The question is whether that position visibly upsets the balance of the profile or causes a specific aesthetic concern.
It is not a good idea to diagnose yourself by looking at your profile in the mirror for hours or by comparing yourself with photographs of other people. A phone camera, the focal length, head posture and even the position of the lips can distort the profile considerably.
Common features of an under-projected chin
Some signs that may point to insufficient projection are:
- A chin clearly set behind the lower lip.
- A profile in which the nose looks dominant.
- A short or poorly defined lower third of the face.
- A very marked mentolabial groove.
- A lack of continuity between chin and jaw.
- A poorly defined angle between the neck and the chin.
- The appearance of a double chin without much accumulated fat.
These features must be analysed together. A small chin can be perfectly harmonious in one face, while an apparently mild retrusion can greatly alter the proportions of another.
The relationship between nose, lips, chin and jawline
The facial profile works like a composition. When we visually change one of its parts, the perception of the others changes too.
For example, an under-projected chin can make a normal-sized nose look bigger. By bringing the chin slightly forward, the nose does not change, of course, but its relationship with the rest of the face becomes more balanced.
We also need to look at the lips. Excessive lip augmentation in someone with a receding chin can accentuate the imbalance of the profile even further. Sometimes there is no need to reduce lip volume or change the nose, but rather to provide support where it is really lacking: the chin.
The jawline completes the analysis. A well-defined jaw can lose continuity if the chin sits too far back, whereas appropriate projection can visually connect both sides and improve the structure of the lower third.
Why an apparent double chin can be related to a lack of projection
Not every double chin is due to localised fat. Bone anatomy, the position of the chin, skin quality and the distribution of soft tissue also play a part.
When the chin is receding, there is less forward support and the visual distance between the chin and the neck is shortened. This can make the submental area look fuller, even when there is no significant accumulation of fat.
By projecting the chin we can improve the cervicomental angle and make the neck look more streamlined. However, hyaluronic acid does not remove fat or tighten significant laxity. Where there is adipose tissue, sagging or marked muscle bands, other treatments will need to be considered.
How chin filler improves the facial profile
The most obvious improvement is usually seen from the side, but a good treatment must also work from the front and at three-quarter view. A chin that only looks good in a side-on photograph may not have been planned correctly.
Balancing the lower third of the face
The chin forms part of the lower third of the face, together with the lips and the jaw. Its length, width and projection determine whether this area looks in proportion to the forehead and the middle third.
In faces with a short lower section, we can add some length. In a long face, on the other hand, we will probably prioritise horizontal projection and avoid adding too much height.
Small changes in this area can make the face look more mature, defined or streamlined. And yes, sometimes the result is hard to explain because it does not look as though “we have done” anything in particular; everything simply fits together better.
Defining the angle between the chin and the neck
A well-positioned chin creates a clear transition point towards the neck. When projection is lacking, that boundary becomes blurred and the submental area looks heavier.
Filler can increase the visual distance between the chin and the neck, creating a cleaner angle. This effect is particularly interesting in young patients who are worried about a supposed double chin but who in fact have little forward support.
We must stress this: projecting the chin can disguise an apparent double chin, but it does not replace a treatment to remove localised fat.
Results from the front, the side and three-quarter view
In profile, we look for a balanced relationship between nose, lips and chin.
From the front, we check that the chin does not look too narrow, wide, pointed or off-centre.
The three-quarter view shows how the central area blends with the sides of the jaw. It is a very revealing perspective and, interestingly, one of those we use most when talking face to face.
That is why we assess from different angles and do not base the treatment on a single photograph.
In which cases is this treatment indicated?
Chin filler is mainly indicated for people who wish to correct a mild or moderate aesthetic concern without undergoing surgery.
Correcting a receding or short chin
This is one of the most common indications. It may be a retrusion that has always been there, or a loss of definition related to ageing and changes in the tissues.
When the retrusion is mild or moderate, hyaluronic acid makes it possible to create visible, controlled projection. In very marked cases caution is needed: trying to compensate for a significant bone deficiency with large amounts of product can result in a heavy, artificial or unstable chin.
Improving small asymmetries and irregularities
No face is completely symmetrical. Even so, certain deviations, depressions or irregularities can become very visible on the chin.
Filler makes it possible to compensate for small differences between the two sides or to soften an overly marked dimple. The aim is not to create mathematical symmetry — which would not look natural either — but to reduce whatever disrupts the harmony.
Facial harmonisation in women and men
The treatment can be carried out in both women and men, but the planning is not usually identical.
In a female face we may aim for a defined but soft chin, avoiding excessive width or an overly square shape. In male patients, greater width and a more marked transition to the jaw are usually acceptable.
These are general tendencies, not rules. Some women with angular features suit a more structured chin, and some men prefer a discreet result. Anatomy and personal preferences matter more than any label.
When hyaluronic acid cannot replace surgery
Filler changes the external contour, but it does not move the bone, it does not correct the bite and it does not change the actual position of the jaw.
Where there is significant mandibular retrusion, occlusion problems, functional difficulty, sleep apnoea related to anatomy or a relevant skeletal abnormality, an assessment by maxillofacial surgery or orthodontics may be necessary.
A genioplasty may also be more appropriate when the patient wants a permanent change or needs a considerable structural modification.
How chin projection is carried out without surgery
The procedure begins well before the needle or cannula is used. Assessment and planning determine much of the result.
Medical assessment and analysis of facial proportions
During the consultation we examine:
- The projection and length of the chin.
- Its relationship with the nose and lips.
- Facial width.
- The shape of the jaw.
- The mentolabial groove.
- Symmetry.
- Skin quality.
- The presence of submental fat or laxity.
- Muscle dynamics when speaking and making facial expressions.
We also review your medical history, previous treatments, medication, allergies and expectations. Knowing exactly what concerns you is essential. You may think you need a more defined jaw, but on analysing the face we discover that the main deficiency is in the chin.
Choosing the type of hyaluronic acid and planning the injection points
Not all fillers have the same characteristics. For the chin we usually need a product with the support capacity, cohesiveness and behaviour suited to a structural area.
The choice depends on the injection plane, the thickness of the tissues, the desired result and any previous treatments.
The points also vary. We may work on the central area, the sides, the lower part or the transition to the jaw. There is no universal map that works for everyone.
Session length, anaesthesia and sensations during the procedure
The session is usually relatively short, although the total time depends on the assessment, the preparation and the complexity of the case.
We may use topical or local anaesthesia, and many fillers contain lidocaine to make the injection more comfortable. It is common to feel pressure, slight discomfort or a sensation of tightness, especially when working close to the bone.
After the procedure there may be tenderness when moving the lower lip or touching the chin. These sensations usually ease gradually over the following days.
Chin projection and jawline contouring: differences and goals
Although they are often part of the harmonisation of the lower third, they are different treatments.
Which area each treatment changes
Chin projection works mainly on the central and front part of the chin.
Jawline contouring acts on the sides of the jaw, from the area near the chin to the angle of the jaw.
The first treatment aims to improve the most forward point of the profile. The second aims to define the lower and side borders of the face.
When treating only the chin is enough
It may be enough when:
- The jaw already has a suitable shape.
- The main issue is a receding chin.
- There is an apparent double chin caused by a lack of forward support.
- A discreet improvement in the profile is desired.
- The jawline blends in properly once the central area is projected.
In quite a few cases, treating only the chin produces a more elegant and natural change than adding product along the whole jaw.
When it is advisable to combine the chin and jawline
The combination may be indicated when there is little overall definition in the lower third, a lack of continuity between chin and jaw, or asymmetries on the sides.
It can also be used in certain facial masculinisation treatments or in patients who want a more defined jaw contour.
Combining them does not necessarily mean using a lot of product. We can distribute small amounts at strategic points to create continuity.
Why a more defined jaw does not always improve the profile
A very sharp jaw does not suit every face. Adding too much volume at the sides can widen the face, harden the features or make the lower third look heavy.
In a round face, for example, injecting product without first correcting the lack of central projection can increase width without really improving the profile.
More definition does not always mean more harmony. Sometimes the best medical decision is to treat fewer areas.
Results: when they can be seen and how long they last
One of the advantages of the treatment is that the change can be seen from the moment of injection. However, that initial appearance is not exactly the final result.
Immediate changes versus the final result
At the end of the session we can already see greater projection and definition. Nevertheless, there may be swelling, redness or slight temporary asymmetry.
Over the following days the swelling subsides and the product integrates into the tissues. That is why we usually assess the result more precisely once the initial phase is over.
It is best not to judge your chin in the mirror every half hour. The swelling changes, and so may your perception of your face as you get used to the new proportion.
Approximate duration and factors that influence how long it lasts
The duration is not the same for every patient. It depends on:
- The product used.
- The amount and the injection plane.
- The mobility of the area.
- Individual metabolism.
- Anatomy and tissue thickness.
- Previous treatments.
- The goal of the correction.
As a guide, the result can last around a year, although in some people it lasts less and in others it remains visible for longer. Clinical trials on chin fillers have shown the improvement maintained in a significant proportion of patients at twelve months.
Touch-ups and maintenance sessions
Not all patients need a touch-up. Sometimes we prefer to carry out a conservative first correction and review the result once the swelling has gone down.
Nor should maintenance sessions be scheduled automatically every so many months. First we assess how much product remains, how the face has changed and whether there really has been a loss of correction.
Adding filler without assessing the existing material can lead to overcorrection in the long term.
How to achieve a natural, proportionate result
Looking natural does not depend solely on using a small amount. It depends on choosing the right product, plane, shape, distribution and goal.
The importance of respecting the patient’s anatomy and features
Every chin has a different structure. Some are narrow, others wide, rounded, square, short, long or slightly off-centre.
Our job is to improve proportion without erasing those personal characteristics. A good result should blend in with your face, not look like an added piece.
We also take into account the smile, the movement of the lower lip and the contraction of the mentalis muscle. The face is not a still photograph.
Mistakes that can lead to an overly long or prominent chin
Among the most common mistakes are:
- Using too much product in a single session.
- Projecting without assessing vertical length.
- Creating an overly narrow point.
- Ignoring the frontal view.
- Failing to integrate the chin with the jaw.
- Treating severe bone retrusion as if it were a mild volume issue.
- Repeating sessions without checking how much filler remains.
An overly prominent chin can look just as unharmonious as a receding one. The aim is not to reach a theoretical measurement, but to find a believable balance.
Differences between harmonising female and male faces
Broadly speaking, female faces tend to suit somewhat narrower chins and soft contours, whereas in male faces we can work with greater width, projection and jaw definition.
But we should not turn these references into rigid moulds. Each patient’s aesthetic identity, their features and the change they want to achieve should guide the treatment.
Recovery and aftercare
Recovery is usually quick and does not normally require time off work, although it is wise to allow for some swelling or a bruise.
Swelling, tenderness and small bruises
The most common reactions are:
- Mild swelling.
- Redness.
- Pain or tenderness to the touch.
- A feeling of pressure.
- Small bruises.
- Temporary itching.
- Slight unevenness during the first few days.
A review of studies on chin augmentation with hyaluronic acid identified precisely swelling, bruising, pain, redness and itching as the most common local reactions.
What to avoid in the first hours and days
Recommendations may vary depending on the procedure, but in general we usually advise:
- Do not press or massage the area unless medically advised.
- Avoid intense exercise for the first 24 to 48 hours.
- Avoid intense heat, saunas or very hot baths at first.
- Limit alcohol consumption during the first few hours.
- Avoid immediate dental or facial treatments unless they are urgent.
- Sleep without resting your chin heavily on anything.
- Keep the entry points properly clean.
You should not try to “mould” the product with your fingers. If you notice an irregularity, consult us before touching it.
When you can return to work, exercise or wear make-up
Most people can return to work the same day or the next, as long as any swelling does not bother them.
Intense exercise is usually postponed for 24 to 48 hours, following medical advice. As for make-up, it is best to wait until the entry points are closed and clean; it is often recommended to resume it the following day.
Possible side effects, risks and contraindications
Although this is a minimally invasive procedure, it is not without risks. It must be performed by a healthcare professional with knowledge of facial anatomy, the ability to recognise complications and the means to deal with them.
Common, temporary reactions
Swelling, redness, tenderness and bruising are usually mild and temporary.
Less frequently, nodules, infection, persistent inflammation, asymmetry, migration of the product or an unsatisfactory aesthetic result may occur.
There is also a rare but serious risk of accidental injection into a blood vessel. A vascular occlusion can compromise the skin and, in certain areas of the face, cause serious complications. The FDA warns that intravascular injection of fillers can cause necrosis, visual disturbances, blindness or stroke, although these events are uncommon.
Warning signs that require medical assessment
You should contact the medical team immediately if you notice:
- Intense pain that is disproportionate or getting worse.
- Skin that is very pale, greyish, purplish or mottled in appearance.
- Coldness in part of the treated area.
- Blisters or a rapid worsening of skin colour.
- Changes in vision.
- Eye pain.
- Sudden neurological weakness.
- Fever, discharge or increasing swelling several days later.
If vascular compromise is suspected, do not wait to see “whether it is better tomorrow”. A prompt assessment is essential.
Who should not undergo the procedure
The treatment may be postponed or contraindicated in people with:
- Active infection in the skin or nearby areas.
- A history of allergy to any of the components.
- Serious uncontrolled illnesses.
- Certain clotting disorders.
- Pregnancy or breastfeeding, as a precaution and due to a lack of sufficient studies.
- Recent dental procedures with inflammation or infection.
- Unrealistic expectations or a wish for a correction that filler cannot achieve.
Taking anticoagulants or medicines that encourage bruising does not always rule out the treatment, but it must be mentioned during the assessment. You should never stop prescribed medication on your own initiative.
Hyaluronic acid in the chin versus surgical genioplasty
Both options can improve chin projection, but they are not equivalent.
Differences in results, recovery and duration
Hyaluronic acid:
- Does not require surgery.
- Produces an immediate change.
- Has a short recovery.
- Allows gradual corrections.
- Is resorbable.
- Does not change the bone structure or the bite.
Genioplasty:
- Can move or reshape the bone.
- Allows greater structural corrections.
- Requires an operating theatre and a longer recovery period.
- Can offer a permanent result.
- Is more appropriate for certain significant retrusions.
Advantages and limitations of the non-surgical alternative
The main advantage of filler is its ability to achieve a controlled change without an operation. It is also appealing for patients who do not yet want a permanent solution or who want to see how they feel with greater projection.
Its main limitation is that it works with volume. When a lot of bone support is missing, adding gel does not always reproduce the behaviour or stability of a surgical correction.
In addition, the result is temporary and needs reviewing over time.
Which option may be more suitable depending on the degree of retrusion
In mild or moderate retrusions without functional problems, hyaluronic acid can be an effective alternative.
When the lack of projection is significant, there is a bite problem or the jaw needs to be repositioned, a surgical assessment is usually more appropriate.
Between these two extremes there are many nuances. That is why we do not recommend deciding on treatment based solely on a photograph or a video seen on social media.
Frequently asked questions about chin projection
How many syringes of hyaluronic acid are needed?
There is no universal amount. It depends on the degree of retrusion, the shape of the chin, the product, the volume of each syringe and the change you want to achieve.
A subtle correction may require a small amount, while a more visible retrusion may need more product or a treatment in stages. Our preference is usually to progress gradually rather than overcorrect in a single session.
Does the treatment hurt?
It can be somewhat uncomfortable, especially because of the pressure in the deeper planes, but it is usually well tolerated. We use anaesthetic measures, and many products contain lidocaine.
Afterwards there may be tenderness for a few days, especially when touching the area or moving the lower lip a lot.
Can it worsen or disguise a double chin?
It can disguise an apparent double chin when this is mainly due to an under-projected chin. By bringing the chin forward, the transition to the neck improves.
However, adding product incorrectly or excessively can increase the heaviness of the lower third. That is why we must distinguish between a lack of projection, localised fat and laxity.
Can the result be reversed?
Hyaluronic acid fillers can be broken down with hyaluronidase when there is a medical or aesthetic indication. This enzyme is used to correct certain excesses, irregularities and complications, although it must also be administered by an experienced professional.
The fact that the product can be dissolved does not mean the treatment should be approached carelessly. Preventing a complication is always preferable to having to correct it.
Can it be combined with non-surgical rhinoplasty or lip augmentation?
Yes, provided there is an indication and the profile as a whole is planned.
Sometimes we combine the chin with a non-surgical rhinoplasty to balance the relationship between the two areas. We can also assess the lips, but it is not necessary to treat everything at once.
In fact, correcting the chin first can change the perception of the size of the nose or lips and avoid unnecessary procedures.
Does the face change a lot after the procedure?
The harmony can change considerably without your features changing radically. That is one of the most interesting aspects of the treatment.
A projection of just a few millimetres can improve the profile, streamline the neck and give the face more structure. When the procedure is well planned, the people around you may notice you look better without being able to pinpoint exactly what has changed.
A personalised assessment to improve the facial profile without losing naturalness
Chin projection with hyaluronic acid can be a very rewarding treatment when there is an appropriate indication. It makes it possible to correct a receding chin, balance the profile and improve the definition between the face and the neck without surgery.
But the result does not depend on following a fashionable proportion or adding a set amount of product. It depends on understanding the anatomy, analysing the face from different angles and deciding what should be treated and, just as importantly, what does not need to be touched.
At Dr Eva Garrigós Clinic we carry out a personalised medical assessment to study your proportions, understand the change you are looking for and explain clearly the possibilities and limitations of the procedure.
Our aim is not to create a chin that steals the show, but to ensure the chin blends with the nose, lips, jaw and neck. In other words: to improve the profile without losing what makes your face recognisable and natural.
[googlesitekit-end-of-content]

